McDATA OPENconnectors Command Line Interace Manuale Utente Scaricare il pdf (Pagina 50)

2-6

Enterprise Operating System Command Line Interface User Manual

config

Command Example Root> config enterpriseFabMode setState 1

NOTE: You cannot activate Enterprise Fabric Mode while Open Trunking is

enabled.

config.features.enterpriseFabMode

Syntax enterpriseFabMode enterpriseFabModeState

Purpose This command sets the Enterprise Fabric Mode state for the fabric.

The SANtegrity™ feature key must be installed to activate the

Enterprise Fabric Mode state.

Parameters This command has one parameter.

Command Example

Root> config features enterpriseFabMode 1

NOTE: The command config.enterpriseFabMode.setState on page 2-5 has

functionality that is identical to this command.

config.features.ficonMS

Syntax ficonMS ficonMSState

Purpose This command sets the enabled state of the FICON Management

Server. The FICON Management Server feature key must be installed

in order to enable the FICON Management Server State. (The

Sphereon 4300 and Sphereon 4500 switches do not accept this

command.)

NOTE: This command is displayed on a Sphereon 3016 and 3216 only if

the feature key is installed.

enterpriseFabModeState Specifies whether enterpriseFabMode is

active. Valid values are activate and

deactivate. Boolean 1 and 0 may be

substituted as values.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 327 328

Nessun commento

McDATA OPENconnectors Command Line Interace Manuale Utente Pagina 50