McDATA OPENconnectors Command Line Interace Manuale Utente Scaricare il pdf (Pagina 133)

CLI Commands

2-89

config

config.zoning.deactivateZoneSet

Syntax deactivateZoneSet

Purpose This command places all attached devices in the default zone and

takes effect immediately for the entire fabric. This command clears

both the active zone set and the working area.

This command takes

effect immediately in the fabric.

NOTE: The default zone must be activated independently of this command.

Parameters This command has no parameters.

Command Example

Root> config zoning deactiveZoneSet

config.zoning.deletePortMem

Syntax deletePortMem zoneName domainId portNumber

Purpose This command deletes a domain ID and port number for a zone

member in the specified zone in the work area.

Parameters This command has three parameters.

Command Example

Root> config zoning deletePortMem TheUltimateZone 10 5

zoneName Specifies the name of the zone that contains the

member to be deleted.

domainId Specifies the domain ID of the member that to

be deleted from the zone. Valid domain IDs are

in the range 1–31.

portNumber Specifies the port number of the member to be

deleted from the zone. Valid port numbers

values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016 and 3216

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032 and 3232

0–31 for the ED-5000

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 327 328

Nessun commento

McDATA OPENconnectors Command Line Interace Manuale Utente Pagina 133