McDATA OPENconnectors Command Line Interace Manuale Utente Pagina 150
- Pagina / 328
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
2
2-106
Enterprise Operating System Command Line Interface User Manual
perf
Parameters This command has one parameter.
Command Example
Root> perf openTrunking backPressure 1
perf.openTrunking.congestionThresh
Syntax congestionThresh portNumber congestionThreshold
Purpose This command configures the congestion threshold for an individual
port or for all ports.
Parameters This command has the following parameters.
Command Example
Root> perf openTrunking congestionThresh 8 20
perf.openTrunking.lowBBCreditThresh
Syntax lowBBCreditThresh lowBBcreditThreshold
Purpose This command configures the low BB_credit threshold of the
OpenTrunking configuration. The low BB_credit threshold is defined
backPressureState This parameter can be set to enable or disable
OpenTrunking back pressure. Boolean 1 and 0
values may also be substituted. If the state is
configured to be enabled, a back pressure
entry is made to the Event Log and an SNMP
trap is generated if SNMP is configured.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
all applies the congestionThreshold value to
every port on the product.
congestionThreshold Specifies the congestion threshold in terms
of a percentage. Valid values are integers in
the range 1 to 99 or default. Specifying the
value default sets the specified port to the
default threshold level of 10.
- Enterprise Operating System 1
- Command Line Interface 1
- User Manual 1
- Revision Date Description 2
- Contents 10
- Appendix A Error Messages 11
- Glossary 11
- Introduction 21
- Documentation 23
- Conventions 23
- Navigation 23
- Command Tree 25
- Navigation of the 32
- CLI Command Tree 32
- Parameters 33
- Logging In and Logging Out 34
- Using the commaDelim Command 37
- Root> confg 38
- Error 234: Invalid Command 38
- Commenting Scripts 40
- ED-5000 Director 41
- Telnet Session 42
- Backup and Restoration 43
- Command Overview 46
- New and Changed Commands 46
- Root> config fencing show 59
- Root> config ip show 65
- Root> config port fan 4 1 70
- SetSecret 89
- 01:2A:3f:4:5:0:0 eport 91
- 01:2A:3f:4:5:0:0 92
- 01:2A:3f:4:5:0:0 nport 93
- Interface: Web 94
- CLI Commands 101
- Port Number: 4 103
- WWN Binding: Active 103
- SSH: enabled 106
- Telnet: disabled 106
- AA:99:23:23:08:14:88:C1 109
- 123.123.123.123 162 113
- Root> config snmp show 115
- Root> config switch show 123
- Root> maint port reset 4 140
- Root> perf class2 2 143
- Root> perf class3 2 145
- Root> perf errors 2 147
- (default) is displayed next 152
- Throughput Threshold Alerts 162
- Alert Counters 162
- Alert Counters (Continued) 163
- Root> show all 182
- Ficon MS State: Disabled 197
- Ficon MIHPTO (seconds): 180 197
- Root> show frus 197
- Root> show nameServer 201
- Root> show nameServerExt 203
- Error Messages 241
- Commands and 291
- Corresponding Releases 291
- Numerics 319
Prodotti e manuali riguardandi Networking McDATA OPENconnectors Command Line Interace
(26 pagine)
(4 pagine)Razor ScreamMachine manuály
Uživatelské manuály a uživatelské příručky pro Auta Razor ScreamMachine.
Poskytujeme 1 manuály pdf Razor ScreamMachine ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commenti su questo manuale